- Complies with 802.3u 10/100Base-TX, 100Base-FX standards
- Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely
- Provides switch configuration of Half-Duplex / Full-Duplex transfer mode for FX port
- Extends fiber distance up to 2km
What This Product Does
The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.
What This Product Does
The MC110CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC110CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC110CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Other features of this module include the ability to be used as a stand alone device (no chassis required) or with TP-LINK´s 19´´ system chassis, Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port and front panel status LEDs. The MC110CS will transmit at extended fiber optic distances utilizing single-mode fiber up to 20 kilometers.
Dimensions
Width |
94.5 mm |
Depth |
73.0 mm |
Height |
27.0 mm |
Media Converter & Module
Standards and Protocols |
IEEE 802.3, IEEE 802.3u, IEEE 802.3x |
Ports |
1 100M SC port. 1 100M RJ45 port (Auto MDI/MDIX) |
Wave Length |
1310nm |
Network Media 10BASE-T |
UTP category 3, 4, 5 cable (maximum 100m), EIA/TIA-568 100? STP (maximum 100m) |
Network Media 100BASE-T |
UTP category 5, 5e cable (maximum 100m), EIA/TIA-568 100? STP (maximum 100m) |
Network Media 100BASE-FX |
Single-mode Fiber |
LED Indicators |
PWR, FDX/Col, Link/Act, SPD |
Basic Function
Half/Full-Duplex transfer mode for FX port |
Full Duplex Flow Control (IEEE 802.3x) |
Half Duplex Flow Control (Backpressure) |
Extends fiber distance up to 2km |
Link Fault Passthrough and Far End Fault minimize the loss caused by link failure timely |
Warranty
3 Year Manufacturer Warranty |
Disclaimer
Product will be delivered for all urban areas serviceable by major courier agencies. For remote/rural areas the product will be sent by local couriers / Indian Speed Post and may take little more time. |
No Deliveries on Sunday and National Holidays. |
Shipped by Infibeam.com
The following policies apply for the above product which would be shipped by Infibeam.com
1. Infibeam accept returns if the item shipped is defective or damaged
2. In case of damaged or defective product, the customer is required to raise a concern and ship the product back to us within 15 days from delivery
3. Return shipping costs will be borne by Infibeam.com
4. Infibeam will send a replacement unit as soon as the return package is received
5. Infibeam does not offer any cash refunds